Even though, it’s one of the toughest materials to install in your kitchen, granite requires special care and attention. There are variations in the stone, which give this material a unique appeal.
Considering the granite countertops cost a lot of money, homeowners what their counters to look spotless. They improve the look of the entire kitchen, regardless of state of your appliances.
So, let’s look at some of the things you can do, to make your granite countertops beautiful and shiny again.
Natural stone is used to make granite countertops, so each of them is specific. This material is relatively resilient and for that reason numerous companies seal the slab before they make a shipment. However, to secure the counter, you should reapply the sealant from time to time.
For instance, factory sealants are quite durable and can last for decades, depending on use. If you aren’t sure whether you need to reapply a sealant, then make a water bead test. Put a couple of drops of water on granite surface and if it beads up, then your counter is secured.
You can clean your counter by making a simple solution. Mix warm water and dish soap and make sure that soap doesn’t contain components similar to citrus or lemon acid. Then, use a soft cloth to clean your granite surface with this mixture. You should rinse the fabric from time to time while you are repeating this process.
Once you are finished with the cleaning, use a dry cloth to dry the counters completely. If you leave water for you long, it will stain the granite countertop. Depending on the size of the surface, you want to complete this process as fast as possible.
Additionally, you can polish your countertops daily by using a dry microfiber cloth. Some people apply a granite polish to make their counters look spotless.
Since this is the biggest working surface in your kitchen, it requires proper disinfecting. Granite counters are often exposed to bacteria, especially if you are preparing the meals and washing the dishes all the time.
But, to keep things under control, you should periodically disinfect your granite countertops. Make a mixture of water and 91% isopropyl alcohol in proportion of 50:50. For this purpose it’s best to use a spray bottle.
Apply the solution onto the granite and let it sit for five minutes. Use a warm water and dry cloth to remove the residue.
For cleaning purpose avoid ammonia, bleach, scour pads, or any aggressive cleaners, which can damage the countertop.
Whenever you are working on granite surface, make sure to use placemats, cutting boards, or coaters. It will help you prevent food stains.
For everyday cleaning you don’t have to buy granite cleaners. You can if you want, but it’s a waste of time and money. Using the soap and water will do the trick.
When it comes to rotary tools, the market is enormous as this type of machinery is used everywhere. Woodworking, however, creates a whole new industry in which this type of a tool plays a prominent role.
Every woodworker knows that rotary tools are a step forward in their line of work. Even amateurs know how crucial it is to learn how to use rotary tools and which ones to use. It’s hard to compare rotary tools when the sheer number of different types exist. This is why the best way to compare them is to give you some basic info on various products that are popular among people.
A master of the woodworking craft can shape wood in the same way you can shape clay, with incredible ease. A lot of the skill they possess comes from years of work, training, experiments, failures and so on. This is a path every individual has to pass if they want to achieve something great in a field of their choice.
However, the majority of people that have an interest in woodworking see it as a hobby, rather than something they would want to do on a professional level. So, they don’t have will nor time to become pros. They still want to work with the wood; they don’t want to do that on the professional level.
This is where amateur woodworking rotary tools come into play. Every amateur can acquire some necessary woodworking skills with proper tools. The majority of pros also use tools that are either same or similar to those that are available to amateurs. If you want to work with the wood then buying some rotary tools is the best beginning you can make.
Merlin 2 Kit is one of the King Arthur Tools sets of rotary tools every woodworker needs to have. This is a second generation which means that it comes with new features that make it several times better than the previous iteration of the kit. This one costs just shy of 290 dollars, which might seem a lot for those that know nothing about King Arthur Tools and their sets.
This product has a strong motor, large fan, several additional vents, and RoHS compliant electronics. This doesn’t paint the real picture as this tool, and all of its other elements bring a breath of professionality into the world of amateur woodworking.
On the other hand, some people aren’t willing to invest a couple of hundred of dollars to get the necessary tools to work with the wood. Some people want something they could use to change the wood in the small ways. Some wish to accentuate its lines, some pay a lot of attention to small details, and then some people want a tool that could express their creativity. All of them can get a lot out of the Cordless Extension Engraving Pen that costs only 14 dollars. This small and handy rotary tool is perfect for every individual that has an interest in engraving and everyone who likes putting small details in their woodworks.
Purchasing furniture for your home is a special feeling and pleasure, since you truly invest yourself financially and emotionally into designing your private place the way you want to decorate and organize it. Modern furniture industry produces impressive pieces of furniture, true little forms of art, while some people prefer to collect rustic, old-fashioned pieces of furniture that have a specific value. Either way, once you design your interior and fulfill your living space with pieces of furniture you like, you certainly want it to last for a long time and keep the quality and aesthetic. To prevent or at least slow down natural deterioration of your furniture and make it last longer, apply these useful tips listed below.
Removable slip covers are a perfect solution and protection for your furniture during the everyday routine. They protect furniture from slipped juices and foods or pet’s fur, dust and other common types of stains. They are usually made of materials easy to take off, wash, dry and place them back.
Many houses encapsulate dominantly wooden interior, particularly wooden floor, because it makes the house warm, literally and metaphorically. Wood gives this intimate atmosphere to the premises; it’s elegant and classy, but neutral enough not to stick out among other parts of the interior. Wooden chairs are an impressive piece of furniture, especially if it’s a unique design fit among the rest of the furniture. However, nicks and scratches are a common issue with wooden pieces of furniture that spoils the impression. Whether it’s your cat sharpening its claws or accidentally scratching the floor while moving other furniture or any other way of damaging wood, there’s a simple way of fixing it. Purchase a common black shoe polish and use soft, tiny brush to apply it precisely over the nicks and scratches. The color dries quickly, and the wood absorbs the pain. The trick works effectively and smooth.
Leather furniture is a classic style, and these pieces of furniture tend to last a long time and withstand various trends in interior design. However, leather furniture requires specific care and conditioning from time to time, to protect it from getting damaged, as well as to keep its original color and shine. You can purchase various leather conditioners at specialized stores, or you can make your natural conditioner. The ingredients you’ll need include vinegar, linseed oil, essential oil, all mixed within spray bottle. Use a soft cloth to clean the leather surface with this solution and mild pressure.
The aspect we usually forget is sunlight and its UV effect onto various furniture materials. When exposed for a long enough directly to sunlight, many furniture pieces tend to deteriorate slowly, starting from their colors fading away. To protect furniture from this and keep its intensive, vivid design last longer, use drapes and window shades that filtrate harmful sunlight.
When we move into a new house we all want to settle in as fast as possible and feel as comfortable as we can. The only problem is that usually the moving process takes a ton of time and the furniture that gets moved finishes with some scratches, damaged parts, or even gets broken beyond use. So, when that happens you have to go down to your store and get yourself some new furniture that will compliment your new home.
The trick is to not spend thousands of dollars to get the best furniture that can complement your brand-new home with its unique style and class. Once you go shopping to some of the best furniture stores and get what you want it’s time to move it into your hose and settle it down. Now that you have settled in many people don’t think about their furniture for a foreseeable future, and even though most people live their lives like that, it’s not the best move if you want something to last you for ages. Remember when you were growing up and your parents had the same furniture for ages, and nothing was wrong with it? Those were the days, you might things, but the truth is our parents were taught to protect their things far more than we were.
If you have found your perfect furniture and you don’t want to replace it for at least a decade or two you must invest some time and money into protecting it inside your home. There are several ways that you can protect and prolong the life expectancy of your furniture and we will explore some of the methods that are most commonly used in households. For more info visit http://www.furniturebuffers.com
First of all, we have to say that we love all animals and that we ourselves have some cats and dogs. However, when it comes to your furniture life expectancy the pets are your first enemy. If you want to have a longer life on your furniture, you have to set some bounds for pets and other potential factors that can damage your furniture with liquids or scratch it with some sharp objects. That means that animals should never be allowed on the couch or sofa, and coincidentally until the baby learns how to hold down their food, they should either be placed in their crib, or a double towel, or blanket should be placed under them if they are on the couch. Also, keep the eating at the table, more times than not knives during dinner time are the main damage dealers to sofas.
The furniture you buy can also be protected with some additional furniture pads on the bottom or covers. The pads will protect both the floor and the furniture from scratching and the additional pads or covers will help you with sun damage or liquid buildup.
When something gets damaged or broken make sure to replace it. ITs better for the overall health of the furniture if you fix the part that is damaged and put a new material of the same color there as that will keep damage from spreading. Stress less over the damaged part and focus more on how to repair it so it’s not visible as it can be.
When it comes to home improvement work, many people want to get into it but they are not sure what are the first steps when learning. You might think that the first step will be how to adjust the items you want to work on, or what are the easiest projects you can start so you don’t engage in making a hard project from the start.
While all this is needed information and more, in actuality, the first step that should be taken is to learn everything about safety and how to handle the machine you want to operate. When it comes to saws and home work there is no other saw that is more dangerous when it comes to potential injuries if handled in a wrong way than the Circular Saw.
Circular saws don’t have a huge protective design and they mostly rely on the power and knowledge of the user to function at its full capacity. So, while people can pick up a jigsaw and get down to work right away, the Circular Saw should be handled with a lot more preparation.
Let’s list the 4 best circular saw secrets that you should check and learn before you operate a circular saw.
Before you start sawing away anything, you should always inspect your tools. The saw is made from several key components that all need to function at their base so that you as a user of the saw can avoid injury. Check the blade for any rust, bends, cracks and other damaging issues. The saws most important part is the blade, and if there is something wrong with it, you might be putting your self in danger. Next, check the cord of the saw if you are using one with a cord. The cord must be crack free and without any wiring hanging out.
We know that we already mentioned it in part in the above text, but we can’t stress enough how important this part is. Circular saws are not just good for cutting wood, they can cut metal, rock and even concrete, so make sure that you check your blade and the position of the blade before you start working with the saw.
Whenever you cut a piece of wood or other metals there is a chance that the blade can get pinched and will cause kick back with the material you are working on. To prevent this place the material over a long piece of wood as you can cut into the wood together with your material and the piece of wood will take all the kick back instead of it being a safety issue.
Cutting many pieces of material is common in the saw business. So, when you are cutting several pieces of wood, for instance, lump them together and align them to perfection and cut 4-5 at one time. Just make sure to adjust the height of the blade to your needed length.
The cleaning of anything is considered a chore and a burden that many working moms and dads don’t like to spend time on. We, on the other hand, consider it art, and we love to paint your house with the clean feeling. If you decide to hire us all your troubles and time that you spend when you have to clean your house for hours will be our job, and you will have more time to dedicate to your loved ones or yourself. We consider it an honor that you have entrusted your home to be our canvas as we paint it to be clean and sanitized from all the dirt and bacteria. Professional cleaning itself requires a high knowledge of chemicals used and a dedicated and motivated person since the cleaning tasks that many individuals need to face can be a huge undertaking.
We consider cleaning to be art because your house might look one way when you require the service and another way once the cleaning job is done, and every time, the house will look better after it has been cleaned. Cleaning also is identified as the best health helper. There are tons of things in the world that affect us in a bad way and keeping your house clean is the best prevention for many of those things. While you can take vitamins and eat healthy food, nothing is more important than to have a well cleaned and sanitized home.
Cleaning is not just a chore it is also
– A form of restoration
– A tool for instant gratification
– It leaves a positive influence on behavior
– A simple social and self-respect booster
We love to clean! When we clean we clean with the sum of our skill and knowledge, not just our hands. What defines us is how we leave your house after the job is done. We will never leave your home in a “second rate” state as we will always strive to make it a grade A+. That is why cleaning is an art for us.
People from all over the world love to have wooden furniture in their home. It makes your house look cozy and warm, while at the same time it shows a lot of class and taste for the owners. The wooden furniture is easy to maintain, but it requires that you invest a little more time in cleaning it or you risk damaging the surface.
If you use our cleaning method, your wooden furniture will look good as new and will also stay protected for a longer period.
Prepare these items before you start:
– Bucket with warm water
– Dishwashing detergent
– Cotton balls
– Clean cloth and rags
– Mineral spirits
– Wood wax
And if you want to revive a wooden furniture item that has been sitting in the garage for a couple of years than prepare Trisodium phosphate (TSP).
We can start with the most common cleaner, the warm water with a bit of dishwashing detergent. Grab a cotton ball and wipe the hard to reach areas with them and don’t apply too much soap or else when the cleaned area is dry, it will leave a white stain. After that use the sponge for the big parts to complete this cleaning task faster. After you are done with the detergent method if you still want to clean the area a bit more, it is time to use Mineral spirits. Once you test it on a small area, wash the furniture with a sponge and wipe with a dry rag. Once you have cleaned the whole wooden item, it is time to protect it with wood wax. Apply the wax using a soft, lint-free cloth and rub it all over, so your furniture item takes less damage from the sun and time. This will also keep it clean for a longer period.If you want to revive an ancient piece of furniture than TSP can help you, but be advised you need to handle this with gloves and care as if used on furniture with good condition it can damage the surface.
There are various cleaning types of equipment that we will use while we clean your house. We will list some of them here so you can prepare your home in advance as some make a loud noise and scare the pets, and some require to be left for a couple of hours, so they help with the drying of the furniture.
These things are the size of a backpack and will be placed on your carpets to help them dry off faster. We will also use them to dry your cloth couches.
These machines are often used to specially clean your tiles and dirty grout areas. Once we connect them to the hose, they emit an intense sound so you might want to keep the dogs away during the cleaning process.
The steam cleaners can be used for various special cleaning projects. Out of which many will be used to specially clean your carpets and furniture. They are exceptionally good for deep cleaning and sanitizing, as no bacteria can survive at the temperature these machines emit their steam.
The extractors will help us collect any excess water residue that is left on the carpets and your furniture once we are done cleaning them. They emit a loud sound so you might want to take the pets away during the cleaning procedure. These machines are also excellent removers of bacteria in your furniture and carpets.
Auto scrubbers are mostly used to scrub the kitchen area and work wonders on your tiles. Once we are done cleaning with this machine, you can bet your tiles will look like new.